In joint mode, the VFINE speed setting moves the robot approximately ______ degrees.

Study for the NTA FANUC Test 2. Dive into topics on Teach Pendant, Alarms, Jogging, and Initial Setup with multiple choice questions, hints, and explanations. Get ready for your test!

Multiple Choice

In joint mode, the VFINE speed setting moves the robot approximately ______ degrees.

Explanation:
In joint mode, motion is controlled by rotating each axis, so the unit used is degrees. VFINE represents the very fine jog step, giving the smallest possible angular increment per move. That increment is about 0.0001 degrees, which lets you nudge the joints with extremely high precision. The other options refer to linear distances in millimeters or a larger angular step, which don’t reflect the fine rotational increments used in joint mode. Thus, 0.0001 degrees is the correct, most precise setting.

In joint mode, motion is controlled by rotating each axis, so the unit used is degrees. VFINE represents the very fine jog step, giving the smallest possible angular increment per move. That increment is about 0.0001 degrees, which lets you nudge the joints with extremely high precision. The other options refer to linear distances in millimeters or a larger angular step, which don’t reflect the fine rotational increments used in joint mode. Thus, 0.0001 degrees is the correct, most precise setting.

More practice questions
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy