In joint mode, the FINE speed setting moves the robot approximately ______ degrees.

Study for the NTA FANUC Test 2. Dive into topics on Teach Pendant, Alarms, Jogging, and Initial Setup with multiple choice questions, hints, and explanations. Get ready for your test!

Multiple Choice

In joint mode, the FINE speed setting moves the robot approximately ______ degrees.

Explanation:
In joint mode, jog speed levels control how far each joint moves per jog command, and the FINE setting is the smallest, most precise increment. That level moves the joint about 0.001 degrees per jog step, which lets you dial in tiny orientation tweaks without overshooting. The other options are either linear measurements (mm) that don’t apply to angular joint motion, or an increment (0.0001 degrees) that’s smaller than the standard fine-step for this setting. So the best choice is about 0.001 degrees.

In joint mode, jog speed levels control how far each joint moves per jog command, and the FINE setting is the smallest, most precise increment. That level moves the joint about 0.001 degrees per jog step, which lets you dial in tiny orientation tweaks without overshooting. The other options are either linear measurements (mm) that don’t apply to angular joint motion, or an increment (0.0001 degrees) that’s smaller than the standard fine-step for this setting. So the best choice is about 0.001 degrees.

More practice questions
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy